Precautions for Using the 12864 LCD Module


The S50 in‑vehicle smart display features a detachable, modular camera system and supports three cameras for versatile scene‑specific recording. Its driving camera offers 3K ultra‑wide‑angle dashcam footage at up to 2880×1620 resolution, with a 140° wide field of view that captures multiple lanes for more comprehensive recording. The device also upgrades to 32GB eMMC onboard storage, delivering faster, more stable read/write speeds and eliminating compatibility issues with memory cards. Additionally, a new guest‑mode password protection has been added to the dashcam, helping safeguard your privacy when lending the vehicle to others.

Precautions for using the 12864 LCD module:

When using this LCD module in product design, please ensure that the LCD’s perspective view aligns with the product’s intended use.

LCD screens are based on glass, and dropping them or striking them with a hard object can cause the screen to crack or shatter, especially at the corners.

Although the polarizing film on the LCD surface helps reduce reflections, care should be taken to avoid scratching it; it is generally recommended to use a transparent plastic protective screen over the LCD.

If the LCD module is stored below the specified temperature, the liquid crystal material will crystallize, and its performance will deteriorate.

If the LCD module is stored at a temperature above the specified limit, the molecular alignment of the liquid crystal material will become disordered, resembling that of a liquid, and it may not return to its original state.

If the temperature and humidity limits are exceeded, the polarizer may delaminate or blister. Therefore, LCD modules should be stored within the specified temperature range.

If the LCD surface comes into contact with saliva or water droplets, it should be wiped off immediately to prevent discoloration or staining over time; water vapor can cause corrosion of the ITO electrodes.

If you need to clean the LCD screen surface, gently wipe it with a cotton cloth or soft cloth. If you still cannot remove it, wipe it after you breathe on it.

The LCD module should be driven in accordance with the specified rated parameters to prevent malfunctions and permanent damage. Applying a DC voltage to the liquid crystal material will cause it to degrade rapidly; therefore, ensure that the M signal, which provides an AC waveform, is applied continuously.

In particular, the power switch should follow a power-up sequence to avoid latching and directly driving the LCD with DC.

 

Next page:

Leave a message online


Please provide the correct information, and we will contact you promptly!