Main material composition of OLED displays


Emissive materials are the most critical components in OLED devices. Ideally, such materials should exhibit high luminous efficiency, possess electron- or hole-transporting properties—or both—form stable and uniform thin films upon vacuum thermal evaporation, and have HOMO and LUMO energy levels that match those of the respective electrodes.

The materials used in OLED displays are primarily categorized by function into several major types: cathode materials, anode materials, buffer layer materials, charge-transport materials, and emissive materials. The following sections will describe their main functions.

1. Cathode material

 As the cathode material in OLED displays, a metal with the lowest possible work function should be selected to enhance electron injection efficiency, since injecting electrons is more challenging than injecting holes. The work function of the metal significantly affects both the luminous efficiency and the operational lifetime of an OLED device: a lower work function facilitates easier electron injection and higher luminous efficiency. Furthermore, a lower work function reduces the interfacial barrier at the organic/metal interface, resulting in less Joule heating during operation and a substantial increase in device lifespan.

2. Anode Material

The anode material in OLEDs primarily serves as the anode of the display and is required to have a work function as high as possible to enhance hole injection efficiency. OLED devices necessitate that one side of the electrode be transparent; therefore, ITO conductive glass—a transparent material with a high work function—is typically chosen as the anode. ITO (indium tin oxide) glass exhibits a transmittance exceeding 80% across the wavelength range of 400 nm to 1000 nm and also maintains high transmittance in the near-ultraviolet region.

3. Buffer Layer Material

In OLEDs, the hole transport rate is approximately twice that of the electron transport rate. To prevent holes from reaching the organic/metal cathode interface and causing quenching of light emission, a CuPc buffer layer is incorporated during device fabrication. As a buffer layer, CuPc not only reduces the interfacial energy barrier between ITO and the organic layers but also enhances adhesion at the ITO/organic interface, improving hole injection contact and suppressing excessive hole injection into the HTL layer, thereby balancing electron and hole injection.

4. Charge Transport Materials

OLED devices require that holes injected from the anode and electrons injected from the cathode be balanced in their injection into the emissive layer; that is, the injection rates of holes and electrons should be essentially equal. Therefore, it is necessary to select appropriate hole- and electron-transport materials. During device operation, heat generation can cause the transport materials to crystallize, leading to a decline in OLED performance; thus, materials with a high glass transition temperature (Tg) should be chosen as transport materials. In experiments, NPB is typically used as the hole-transport layer, while Alq3 is employed as the electron-transport material.

5. Luminescent Materials

Emissive materials are the most critical components in OLED devices. Ideally, such materials should exhibit high luminous efficiency, possess electron- or hole-transporting properties—or both—form stable and uniform thin films upon vacuum thermal evaporation, and have HOMO and LUMO energy levels that match those of the respective electrodes. Among small-molecule emissive materials, Alq3 is used directly as the sole emissive layer. Other materials cannot function independently as an emissive layer and require doping into a host matrix to emit light, such as the red emitter DCJTB, the green emitter DMQA, and the blue emitters BH1 and BD1. Alq3 is an organic compound that can serve both as an emissive-layer material and as an electron-transport layer.

 

Leave a message online


Please provide the correct information, and we will contact you promptly!