What is arc LCD splicing screen?

2021.09.15

When we make big screens, we sometimes think about bending the LCD splice screen splicing method. First, consider the aesthetics and personality of curved shapes. Second, some rooms are designed to be curved so that screen walls can be installed. When it can be integrated with decorations and is also designed to be curved, it will achieve better visualizations. It is used in this way in some galleries of companies, museums, etc. How to make liquid crystal splicing screen curve screen?

A curved LCD splice screen is not a single screen, but curved

At present, the LCD installation method is also horizontal and vertical, whether TV or screen, the general ratio of 16:9, although some TVS have been bent, but in the field of splicing liquid crystal has not been large-scale production or application. Therefore, the curved LCD splicing screen is actually an arc effect achieved by some splicing device, and the monolithic screen is not simply designed to be curved.

Two, how to make arc liquid crystal splicing screen

To understand the composition of curved LCD splicing screen, the key is our design and installation problems. Due to the different traditional splicing, the entry arc must be considered in the initial design. Under normal conditions, the arch will be designed between 170 and 178 degrees. The lower the degree, the larger the arc, the more obvious the effect. The number of needles in the figure reflects the effect of the installation. Secondly, the number of joints should be less and less, especially the more columns, the more natural the curvature, the better the effect. We recommend making arches in more than 5 columns, otherwise you will imagine the real effect after stitching. There are differences in addition, installation and construction, arch effect in addition to the previous design, in fact, installation testing technology, the installation of our engineers according to the design of the arch assembly mounting bracket, and then adjust the distance between the screen and seams, etc., this is usually a test technology, it will take a long time to adjust, and maintain the effect is not tight on the screen.

Therefore, if our users want to design a curved LCD splicing screen, the first thing to remember is that their installation environment is not allowed. The second is the previous design proposal, which includes the size of the arch, the number of Spaces and the number of effects. Look for an experienced manufacturer to ensure that the installation can be done without problems.